Description
Kintex® UltraScale™ devices provide the best price/performance/watt at 20nm and include the highest signal processing bandwidth in a mid-range device, next- generation transceivers, and low-cost packaging for an optimum blend of capability and cost-effectiveness.Source: https://www.xilinx.com/products/silicon-devices/fpga/kintex-ultrascale.html
AXKU041 is our first generation High Performance PCIE3.0 x8 Card with XCKU040 FPGA in the centre, equipped with 2x 10G SFP+, 1x HPC + 2x LPC FMC, enabling high signal processing bandwidth, rich expandability with the 3x FMCs. Ideal for Packet processing, DSP-intensive (medical imaging), 8K/4K Video, and Heterogeneous Wireless Infrastructure. Dual powered via DC or PCIE, can work standalone or being plugged in a PC. A great choice for your high demanding projects.
Ideal for:
- Packet Processing in networking and data center applications
- DSP-intensive processing in next-generation medical imaging
- 8k/4k Video
- Heterogeneous wireless infrastructure
For a Single board form with 4x SFP+ and SATA, check out our best selling AXKU040. For our 2nd generation PCI Express form, check out the AXKU042 or AXKU062. For a SOM form, look at our ACKU040 or ACKU060.
Note: AXKU041 is a single PCB design, not a SOM + Carrier Board.Comparison
FPGA | XCKU040-2FFVA1156I |
Chip Level | Industrial Grade |
Speed Grade | -2 |
Logic Cells | 530K |
CLB Look Up Tables (LUTs) | 242,400 |
CLB Flip-Flops | 484,800 |
Max. Distributed RAM (Kb) | 7,050 |
Block RAM Blocks (36Kb each) |
600 |
Total Block RAM | 21.1 Mb |
Global Clock | 10 |
I/O DLL | 40 |
DSP Slices | 1,920 |
PCIE Gen3 x8 | 3x |
GTH Transceiver | 20x, 16.3 Gb/s max |
Features
DDR4 | 4x 1GB DDR4, total 4GB, 64bit Bus, Data Rate 2400Mbps |
QSPI FLASH | 2x 256Mbit, total 64MB, for user data storage |
FMC Expansion Port | 3x Standard FMC Expansion Ports: 2x LPC and 1x HPC, for Xilinx/ALINX or 3rd Party FMC cards |
SFP+ | 2x SFP+ Interfaces, speed of each channel up to 12.5Gb/s |
Ethernet Interface | 1x 10/100/1000M Ethernet with RJ45 for data exchange |
SMA Interface | 2x SMA Interfaces, connecting external high speed signal |
JTAG | 10-pin 2.54mm (0.1-inch) Standard JTAG port for Programs Debug and Download |
Temperature Sensor | LM75, for onboard ambient temperature |
EEPROM | EEPROM 24LC04 with IIC |
USB UART | for serial communication with PC or devices |
Crystal Oscillator | 1x 200MHz for the FPGA; 1x 156.25MHz Clock Source for the SFP+; 1x 156.25MHz Clock Source for the GTH transceiver |
LEDs | 1 Power Indicator, 1 DONE, 4x User, 2x PCI Fence |
KEYs | 1x RESET 1x User |
SD Card Slot | 1x micro-SD Card Slot, support SD mode and SPI mode |
Power Supply
Voltage Input: +12 V DC, 2.1mm x 5.5mm
Current Input: Max. Current 3A
What's Included
FPGA Board | 1 | DC Fan (installed) | 1 |
Mini-USB Cable | 1 | Programming Cable | 1 Set |
12V Power Adapter | 1 | PCIE Fence | 1 |
Dimensions
Dimension | 210mm x 106.65mm |
PCB | 14-Layer, with Independent GND and VCC Layers |