Description
AX7203 is a cost-effective all rounder Xilinx Artix-7 XC7A200T PCI Express 2.0 Development Card with 2x Gigabit Ethernet, 2x HDMI, and 2x 40-pin Expansion Ports, the best value for a variety of cost and power-sensitive applications including software-defined radio, machine vision cameras, and low-end wireless backhaul.
The SOM model used is AC7200.
The AX7103 shares the same carrier board with AX7203.
FPGA Specification
| FPGA | XC7A200T-2FBG484I |
| Speed Grade | -2 |
| Chip Level | Industrial Grade |
| Working Temperature | -40℃~85℃ |
| Logic Cells | 215,360 |
| Slices | 33,650 |
| CLB Flip-Flops | 269,200 |
| Maximum Distributed RAM (Kb) | 2,888 |
| Block RAM/FIFO w/ ECC (36 Kb each) | 365 |
| Total Block RAM (Kb) | 13,140 |
| CMTs (1 MMCM + 1 PLL) | 10 |
| Maximum Single-Ended I/Os | 500 |
| Maximum Differential I/O Pairs | 240 |
| DSP Slices | 740 |
| PCIe® Gen2 | 1 |
| Analog Mixed Signal (AMS) / XADC | 1 |
| GTP Transceivers (6.6 Gb/s Max Rate) | 16 |
Board Features
| DDR3 | 2 Pieces of 512MB DDR3, 1GB total, 32 bit bus width, max rate 800Mbps |
| QSPI Flash | 1 Piece of 128Mbit, for FPGA bin file and user data storage |
| PCI Express 2.0 | x4 lane, single channel rate up to 5G baud |
| Gigabit Ethernet | 2x 10/100/1000M Ethernet with RJ-45 |
| JTAG | 10-pin 2.54mm (0.1-inch) Standard JTAG port for Programs Debug and Download |
| HDMI | 1x Output, up to 1080p@60Hz, supports 3D Output |
| HDMI | 1x Input, up to 1080p@60Hz, supports multiple formats |
| USB UART | for Serial Communication with PC/Devices |
| Crystal Oscillator | 200MHz Differential for FPGA SYS_CLK, 125MHz Differential for GTP Transceivers. |
| 40-pin Expansion Port | 2x 40-pin Expansion Port (2.54mm / 0.1 inch pitch), fit with ALINX Binocular Camera Module, TFT LCD Screen, Camera, AD/DA, etc. Includes: 1x 5V, 2x 3.3V, 3x GND, 34x I/O. |
| EEPROM | 1x 24LC04 with IIC |
| SD Card Slot | 1x micro-SD Card Slot, support SD mode and SPI mode |
| XADC | Reserved 2x8 2.54mm pitch header, for the FPGA's XADC pins |
| LED | SOM: 1 PWR, 1 DONE, 1 User Carrier: 1 PWR, 4 User, 2 for UART (TX/RX) |
| Push-Buttons | SOM: 1 Reset; Carrier: 1 Power On/Off, 2 User |
Power Supply
Voltage Input: +12 V DC, Barrel plug 2.1 x 5.5mm
Current Input: Max. Current 2 A
What's Included
| FPGA Board | 1 | Heatsink | 1 |
| Mini USB Cable | 1 | Programming Cable | 1 set |
| 12V Power Adapter | 1 | PCI Bracket | 1 |
Dimensions
| Dimension | Carrier: 188mm x 110.8mm SOM: 55mm x 45mm |
| PCB | SOM: 10 Layer Carrier: 4 Layer Independent GND and Power Layers |
Quick Links
AX7203 Recommended by xilinx.com
Full documentation including DXF files will be provided by CodeRobin IT.