Description
AC7200 is a top range Xilinx Artix-7 FPGA SOM, equipped with XC7A200T, 1GB DDR3 memory, QSPI Flash, Clock sources, and Power. Through Four 80-pin I/O connectors on the backside, 6.6 Gb/s GTP Transceivers and 3.3V SelectIO are exposed, great for your Industrial applications.
For a XC7A100T device SOM, check our AC7100B.
We have the following Development Boards designed with this SOM:
- AX7201: 4x SFP, 4x Gigabit Ethernet
- AX7202: 2x SFP, 1x Gigabit Ethernet, 1x RS232
- AX7203: 2x HDMI, 2x Gigabit Ethernet, PCIE
Full documentation provided to speed up your own Carrier Board design.
FPGA Specification
FPGA | XC7A200T-2FBG484I |
Logic Cells | 215,360 |
Slices | 33,650 |
CLB Flip-Flops | 269,200 |
Max. Distributed RAM (Kb) | 2,888 |
Block RAM/FIFO w/ ECC (36 Kb each) | 365 |
Total Block RAM (Kb) | 13,140 |
CMTs (1 MMCM + 1 PLL) | 10 |
DSP Slices | 740 |
PCIe Gen 2 | 1 |
Transceivers | 4x GTP, 6.6Gb/s Max Rate |
Max Single-Ended I/Os | 500 |
Max Differential I/O Pairs | 240 |
Analog Mixed Signal (AMS) / XADC | 1x 12bit, 1Mbps |
Chip Level | Industrial Grade |
Speed Grade | -2 |
Working Temperature | -40℃ ~ +85℃ |
SOM Features
RAM | DDR3, 1GB (2x512MB), 32bit Bus, 800Mbps |
QSPI FLASH | 1x 128Mbit, for user data storage |
PCIe 2.0 | PCI Express 2.0 x4 Lane |
Board-to-Board connectors | 4x 80-pin Panasonic Industrial Grade Connectors (AXK580137YG ), matching connector on the carrier board is AXK680337YG |
Active Crystal Oscillator | 1x Differential 200MHz provide FPGA Clock 1x Differential 125MHz for the GTP |
LEDs | 1x Power Indicator (PWR), 1x DONE, 1x User |
Push Buttons | 1x Reset |
JTAG | 6-pin 2.54mm pitch |
Power Supply
Voltage Input: +5V, via Board-to-Board connectors, or J3
What's Included
FPGA Board | 1 |
Dimensions
Dimension | 45.0mm x 55.0mm x 6.0mm |
Connector Mated height | 3.0mm |
PCB | 10 Layer, Independent GND and Power Layers |
Resources & Downloads
AC7200 Recommended by xilinx.com
Full documentation including Schematics, Demo projects (if applicable) will be provided by CodeRobin.