
Description
Comparison
FPGA Chip | XC7A100T-2FGG484I | PCIE 2.0 | x4 |
Logic Cells | 101,440 | GTP | x4 |
Look Up Tables (LUTs) | 15850 | Up to 6.6 Gb/s | |
CLB Flip-Flops | 126,800 | XADC | 12bit, 1Mbps AD |
Block RAM | 4860kbit | Chip Level | Industrial Grade |
DSP Slices | 240 | Working Temperature | -40℃ ~ 85℃ |
QSPI FLASH | 128Mb | Speed Grades | -2 |
DDR3 | 2x 512MB, total 1GB | Active Differential Crystal | 2x |
Total IOs | 180 | Number of Differential Pairs | 48 |
Voltage Adjustable IOs | 100 |
Features
DDR3 | 2x 512MB DDR3, 32bit Bus, Data Rate 800Mbps |
QSPI FLASH | 128Mbit, for user data storage |
GTX Transceiver | 4x GTP, each up to 6.6 Gb/s, for SFP and PCIE data communication |
PCIE 2.0 | x4, High-Speed Data Transmission Interface, single channel rate up to 5G baud |
Ethernet Interface | 2x 10/100/1000M Ethernet with RJ45 for data exchange |
JTAG | 10-pin 0.1-inch (2.54mm) Standard JTAG port for Programs Debug and Download |
HDMI Output | Support 1080p@60Hz, 3D Output |
HDMI Input | Support 1080p@60Hz in different formats |
USB UART | for serial communication with PC or devices |
Crystal Oscillator | 200MHz for the PS, 125MHz for the GTX transceiver |
LEDs | 1 on Core Board, 4x on Carrier Board |
KEYs | 1 Reset, 4x User |
40-pin Expansion Port | 2x 40-pin Expansion Port (0.1 inch / 2.54mm pitch), fit with ALINX Binocular Camera Module, TFT LCD Screen, Camera, AD/DA, etc. |
EEPROM | EEPROM 24LC04 with IIC |
SD Card Slot | 1x micro-SD Card Slot, support SD mode and SPI mode |
Power Supply
Voltage Input: +12 V DC, Max Current 2A
What's Included
FPGA Board | 1 | Heat Sink | 1 |
Mini-USB Cable | 1 | USB Downloader Cable | 1 Set |
12V Power Adapter | 1 | PCIE Fence | 1 |