Description
Zynq® UltraScale+™ MPSoC devices provide 64-bit processor scalability while combining real-time control with soft and hard engines for graphics, video, waveform, and packet processing.
Zynq UltraScale+ EVSource: https://www.xilinx.com/products/silicon-devices/soc/zynq-ultrascale-mpsoc.html
Video Codec Enabled for Multimedia and Embedded Vision:
- Quad Arm Cortex-A53
- Dual Arm Cortex-R5F
- 16nm FinFET+ Programmable Logic
- Arm Mali™-400MP2
- H.264/H.265 Video Codec
Z7-P is our 2nd Generation Xilinx 7EV Top End High Performance PCIe3.0 x8 development board, part of the brand new AUMO family designed for the EV/Car Industry. Equipped with H.264/H.265 Video Codec, 1x HPC FMC, and NVME M.2, built for Video Processing and Vision. Streamlined layout making it ideal to work together with our new range of FMC: FH9712 - 16 Channel GMSL2/GMSL1 Video Card, FL9295 - 4 Channel GMSL1/2 Video Card.
Ideal for:
- 5G Wireless
- Next-generation ADAS
- Industrial Internet-of-Things
- Multimedia and Embedded Vision
For our classic Best selling all-rounder 7EV card, check for the AXU7EV.
The SOM model used is ACU7EV. For a mid-range EV board, look for our AXU5EV-P; For an entry-level EV board, check out our AXU4EV-P.
Model Specification
| SOM Model | ACU7EV |
| FPGA | XCZU7EV-2FFVC1156I |
| Processors | 4x ARM Cortex-A53, 1.333GHz 2x ARM Cortex-R5, 533MHz |
| GPU | ARM Mali-400 MP2, up to 667MHz |
| RAM | PS: DDR4, 4GB, 64bit Bus, 2400Mbps PL: DDR4, 4GB, 64bit Bus, 2400Mbps |
| Video Codec Unit (VCU) | 1x H.264 / H.265 |
| High-Speed Connectivity | PCIe® Gen2 x4, 2x USB3.0, SATA 3.1, DisplayPort, 4x Tri-mode Gigabit Ethernet |
| General Connectivity | 2xUSB 2.0, 2x SD/SDIO, 2x UART, 2x CAN 2.0B, 2x I2C, 2x SPI, 4x 32b GPIO |
| Transceivers | GTH 16.3Gb/s Transceivers: 24x |
| Chip Level | Industrial Grade |
| Speed Grade | -2 |
| Working Temperature | -40℃~85℃ |
| Logic Cells (K) | 504 |
| CLB Flip-Flops(K) | 461 |
| CLB Look Up Tables (LUTs) (K) | 230 |
| Max. Distributed RAM (Mb) | 6.2 |
| Total Block RAM (Mb) | 11.0 |
| UltraRAM (Mb) | 27.0 |
| Clock Management Tiles (CMTs) | 8 |
| DSP Slices | 1,728 |
| PL PCIe Gen 3 | 1x Gen3x16 & 1x Gen3x8 |
| eMMC Flash | 8GB |
| QSPI Flash | 2x 256Mbit |
| 1.8V High-Performance (HP) I/Os | 142 |
| 3.3V High-Density (HD) I/O | 46 |
Features
| DDR4 | PS: 4x 1GB DDR4, total 4GB, 64bit Bus, Data Rate 2400Mbps PL: 4x 1GB DDR4, total 4GB, 64bit Bus, Data Rate 2400Mbps |
| Video Codec Unit (VCU) | 1x, Integrated H.264 / H.265 video codec |
| QSPI FLASH | 2x 256Mbit, for user data storage |
| eMMC FLASH | 8GB, for system/boot storage |
| DP | 1x Mini DisplayPort Output, Supports 4K@30Hz or 1080P@60Hz |
| M.2 | 1x NVME M.2 (PCIEx1), for M.2 SSD storage |
| FMC Expansion Port | 1x Standard HPC FMC Expansion Port, for Xilinx/ALINX or 3rd Party FMC cards. Includes 34 Pairs Differential I/O, 1.8V. |
| PCI Express | PCIe Gen3 x8, each channel up to 8GBaud |
| USB 3.0 | 1x USB3.0, (Type-C, HOST, SLAVE or OTG), for external USB devices |
| USB UART | 2x, for serial communication with PC or devices |
| Ethernet Interface | 2x 10/100/1000M Ethernet with RJ45 for data exchange |
| Active Crystal Oscillator | 1x Single-ended 33.333MHz provide PS Clock 1x Differential 200MHz for the PL Logic and DDR Reference |
| JTAG | 10-pin 2.54mm (0.1-inch) Standard JTAG port for Programs Debug and Download |
| Temperature Sensor | LM75, for onboard ambient temperature |
| EEPROM | EEPROM 24LC04 with IIC |
| SD Card Slot | 1 micro SD Card Slot, support SD Mode and SPI Mode |
| Real Time Clock | RTC on 1x Battery LR41 |
| LEDs | SOM: 1x Power Indicator (PWR) Carrier: 6x, 1 PWR, 1 DONE, 2x User, 2x User (PCI Fence side) |
| Push-Buttons | 3x: 1 Reset, 1 PS User, 1 PL User |
Power Supply
Voltage Input: +12 V DC, 2.1mm x 5.5mm
Current Input: Max. Current 3 A
What's Included
| FPGA Board | 1 | DC Fan (installed) | 1x FAN8060 |
| Mini USB Cable | 1 | Programming Cable | 1 set |
| 12V Power Adapter | 1 | PCI Fence | 1 |
| SD Card | 1x 32GB | SD Card Reader | 1 |
Dimensions
| Dimension | 222mm x 106.7mm (Carrier Board) 80mm x 60mm (SOM) |
| PCB | 8 Layer (Carrier Board) 16 Layer (SOM) Independent GND and Power Layers |
Documents & Quick Links
Z7-P User Manual (PDF) (coming soon)
Full documentation including Schematics, DXF files will be provided by CodeRobin IT.