Description
Zynq® UltraScale+™ MPSoC devices provide 64-bit processor scalability while combining real-time control with soft and hard engines for graphics, video, waveform, and packet processing.
Zynq UltraScale+ EVSource: https://www.xilinx.com/products/silicon-devices/soc/zynq-ultrascale-mpsoc.html
Video Codec Enabled for Multimedia and Embedded Vision:
- Quad Arm Cortex-A53
- Dual Arm Cortex-R5F
- 16nm FinFET+ Programmable Logic
- Arm Mali™-400MP2
- H.264/H.265 Video Codec
ALINX AXU5EV-E is a Mid-range IO rich XCZU5EV development board designed with High-Definition Video processing in mind. 4K H.264/H.265 Video Codec and 16nm FinFET+ Programmable Logic opens it up for Automotive ADAS, Smart Vision, surveillance, multimedia, and other embedded Vision applications.
Having the ACU5EV SOM on top of a peripheral rich carrier board, this cost-effective yet powerful combination allows easy processing of many High-end Industrial applications. You can also find the ACU5EV on our PCI-E form development board AXU5EV-P.
AXU5EV-E shares the same Carrier board with AXU2CG-E, AXU3EG, AXU4EV-E.
The Xilinx Zynq UltraScale+ XCZU5EV is supported by Vivado Design Suite, including the free Vivado ML Standard Edition (formerly Vivado WebPACK™).
Learning materials and demo source code are available to get you started in no time.
Model Specification
| SOM Model | ACU5EV |
| FPGA | XCZU5EV-2SFVC784I |
| Processors | 4x ARM Cortex-A53, 1.333GHz 2x ARM Cortex-R5, 533MHz |
| GPU | ARM Mali-400 MP2 |
| RAM | PS: DDR4, 4GB, 64bit Bus, 2400Mbps PL: DDR4, 1GB, 16bit Bus, 2400Mbps |
| Video Codec Unit (VCU) | 1x H.264 / H.265 |
| High-Speed Connectivity | PCIe® Gen2 x4, 2x USB3.0, SATA 3.1, DisplayPort, 4x Tri-mode Gigabit Ethernet |
| General Connectivity | 2xUSB 2.0, 2x SD/SDIO, 2x UART, 2x CAN 2.0B, 2x I2C, 2x SPI, 4x 32b GPIO |
| Transceivers | GTH 16.3Gb/s Transceivers: 16x |
| Chip Level | Industrial Grade |
| Speed Grade | -2 |
| Working Temperature | -40℃~85℃ |
| Logic Cells (K) | 256 |
| CLB Flip-Flops(K) | 234 |
| CLB Look Up Tables (LUTs) (K) | 117 |
| Max. Distributed RAM (Mb) | 3.5 |
| Total Block RAM (Mb) | 5.1 |
| UltraRAM (Mb) | 18.0 |
| Clock Management Tiles (CMTs) | 4 |
| DSP Slices | 1,248 |
| eMMC Flash | 8GB |
| QSPI Flash | 256Mbit |
| 1.8V High-Performance (HP) I/Os | 96 |
| 3.3V High-Density (HD) I/O | 84 |
Features
| DDR4 | PS: 4x 1GB DDR4, total 4GB, 64bit Bus, Data Rate 2400Mbps PL: 1x 1GB DDR4, total 1GB, 16bit Bus, Data Rate 2400Mbps |
| QSPI FLASH | 256Mbit, for user data storage |
| eMMC FLASH | 8GB, for system/boot storage |
| DP | 1x Mini DisplayPort Output, Supports 4K@30Hz or 1080P@60Hz |
| M.2 | 1x NVME M.2, for M.2 SSD storage |
| MIPI | 1x MIPI, for camera e.g. ALINX OV5640 |
| USB 3.0 | 4x USB3.0, for external USB devices |
| USB UART | 2x, for serial communication with PC or devices |
| Ethernet Interface | 2x 10/100/1000M Ethernet with RJ45 for data exchange |
| Active Crystal Oscillator | 1x Single-ended 33.333MHz provide PS Clock 1x Differential 200MHz for the PL Logic and DDR Reference |
| RS485 | 2x RS485 interface |
| CAN | 2x CAN interface |
| JTAG | 10-pin 2.54mm (0.1-inch) Standard JTAG port for Programs Debug and Download |
| Temperature Sensor | LM75, for onboard ambient temperature |
| EEPROM | EEPROM 24LC04 with IIC |
| SD Card Slot | 1 micro SD Card Slot, support SD Mode and SPI Mode |
| Real Time Clock | RTC on 1x Battery LR41 |
| 40-pin Expansion Port | 2x 40-pin Expansion Port (2.54mm / 0.1 inch pitch), fit with ALINX Binocular Camera Module, TFT LCD Screen, Camera, AD/DA, etc. Includes: 1x 5V, 2x 3.3V, 3x GND, 34x I/O. |
| LEDs | SOM: 1x Power Indicator (PWR), 1x DONE Carrier: 3x, 1 PWR, 1 PS User, 1 PL User |
| Push-Buttons | 3x: 1 Reset, 1 PS User, 1 PL User |
Power Supply
Voltage Input: +12 V DC, 2.1mm x 5.5mm
Current Input: Max. Current 3 A
What's Included
| FPGA Board | 1 | DC Fan (installed) | 1x FAN8060 |
| Mini USB Cable | 1 | Programming Cable | 1 set |
| 12V Power Adapter | 1 | Acrylic Panel (Top) | 1 |
| SD Card | 1x 32GB | SD Card Reader | 1 |
Dimensions
| Dimension | 160mm x 100mm (Carrier Board) 80mm x 60mm (SOM) |
| PCB | 6 Layer (Carrier Board) 16 Layer (SOM) Independent GND and Power Layers |
Documents & Quick Links
AXU5EV-E Recommended by xilinx.com
AXU5EV-E User Manual (PDF) rev.B
Full documentation including Schematics, DXF files will be provided by CodeRobin IT.