Description
AXU2CGB is our Entry-Level Zynq UltraScale+ MPSoC Starter Kit, equipped with XCZU2CG-1SFVC784E device, it offers all the main features of the MPSoC family. Ideal application area include: AI, Industrial Automation, IoT, Embedded Vision to name a few.
Designed in a single board form with very compact size (just a bit bigger than a typical SOM), it gives you the flexibility to deploy into production as Edge device. If you are looking for a Carrier Board + SOM design, take a look of AXU2CG-E, which holds the SOM ACU2CG.
AXU2CGB can be used as the perfect learning kit for getting into the MPSoC, Embedded Linux or AI Edge world. With our extensive learning materials, there is no better time to expand your horizons.
Learning materials: 23.3 GB compressed in size, provided by CodeRobin IT.
FPGA Specification
| FPGA | XCZU2CG-1SFVC784E |
| CPU | Dual-Core ARM Cortex-A53, 1.2GHz, Dual-Core ARM Cortex-R5, 500MHz |
| Logic Cells (K) | 103 |
| CLB Flip-Flops (K) | 94 |
| CLB LUTs (K) | 47 |
| Distributed RAM (Mb) | 1.2 |
| Total Block RAM (Mb) | 5.3 |
| Clock Management Tiles (CMTs) | 3 |
| DSP Slices | 240 |
| Chip Level | Commercial Grade |
| Working Temperature | 0℃ ~ +70℃ |
| Speed Grade | -1 |
Board Features
| PS RAM | DDR4, 2GB, 64bit bus, 2400 Mbps |
| EMMC FLASH | 8GB |
| QSPI FLASH | 32MB |
| DP Interface | Mini-Display port up to 4K@30Hz or 1080P@60Hz output |
| PCI Express | PCIe Gen2 x1, speed up to 5.0 GT/s |
| MIPI | x2, connecting ALINX MIPI Interface OV5640 Camera Module AN5641 |
| USB 3.0 | x4, connecting USB Peripherals |
| USB UART | for serial communication with PC or devices |
| Gigabit Ethernet | 10/100/1000M Ethernet with RJ-45 for Data exchange |
| System Clock | PS System Clock 33.3333MHz, PL Clock 25MHz |
| JTAG | 10-pin 2.54mm-pitch JTAG port for Programs Debug and Download |
| EEPROM | 1x 24LC04 with IIC on-board |
| SD Card Slot | 1 micro-SD Card Slot, supports SD Mode and SPI Mode |
| LED | 5x User |
| KEY | 5x, 1 Reset, 4 User |
| 40-pin Expansion Ports | Two 40-pin Expansion Ports (2.54mm Pitch), connect with various ALINX Modules |
| HP I/O (1.8V) | 34, via 40-pin Port J12 |
| HD I/O (3.3V) | 34, via 40-pin Port J15 |
Power Supply
Voltage Input: +12 V DC, Max Current 3A
What's Included
| Board Only | Board with Accessories | |
| FPGA Board | 1 | 1 |
| Programming Cable | - | 1 Set |
| Mini-USB Cable | 1 | 1 |
| 12V 3A Power Adaptor | 1 | 1 |
| SD Card | 32GB | 32GB |
| SD Card Reader | - | 1 |
| Heatsink | - | 1 |
| Cooling Fan (FAN4040) | 1 (Installed) | 1 (Installed) |
Quick Links
AXU2CGB Recommended by xilinx.com
Community Projects
- GNU Radio Toolkit on AXU2CGB Zynq UltraScale+ board ( hackster.io ), by Matjaz