Description
Zynq® UltraScale+™ MPSoC devices provide 64-bit processor scalability while combining real-time control with soft and hard engines for graphics, video, waveform, and packet processing.
Zynq UltraScale+ CGSource: https://www.xilinx.com/products/silicon-devices/soc/zynq-ultrascale-mpsoc.html
Dual-core Entry Point to Heterogeneous Processing:
- Dual Arm Cortex-A53
- Dual Arm Cortex-R5F
- 16nm FinFET+ Programmable Logic
ACU2CG is our entry-level Xilinx Zynq UltraScale+ MPSoC SOM, equipped with 2GB DDR4 memory, QSPI and eMMC Flash, Clock sources, and Power. Through four 120-pin I/O connectors on the backside, PS side PCIe, USB, SATA, DisplayPort, and Ethernet, PL side IOs are exposed, great for your Industrial applications.
Ideal for:
- 5G Wireless
- Next-generation ADAS
- Industrial Internet-of-Things
For an ALINX designed I/O rich carrier board with this SOM, please check out our AXU2CG-E. For an entry-level EG device, see our ACU3EG. For a single-board compact dev board with XCZU2CG, look at our AXU2CGB.
Model Specification
| FPGA | XCZU2CG-1SFVC784E |
| Processors | 2x ARM Cortex-A53, 1.2GHz 2x ARM Cortex-R5, 500MHz |
| RAM | PS: DDR4, 2GB, 64bit Bus, 2400Mbps PL: Reserved |
| PS High-Speed Connectivity | PCIe® Gen2 x4, 2x USB3.0, SATA 3.1, DisplayPort, 4x Tri-mode Gigabit Ethernet |
| PS General Connectivity | 2xUSB 2.0, 2x SD/SDIO, 2x UART, 2x CAN 2.0B, 2x I2C, 2x SPI, 4x 32b GPIO |
| Chip Level | Commercial Grade |
| Speed Grade | -1 |
| Working Temperature | 0℃~70℃ |
| Logic Cells (K) | 103 |
| CLB Flip-Flops(K) | 94 |
| CLB Look Up Tables (LUTs) (K) | 47 |
| Max. Distributed RAM (Mb) | 1.2 |
| Total Block RAM (Mb) | 5.3 |
| UltraRAM (Mb) | - |
| Clock Management Tiles (CMTs) | 3 |
| DSP Slices | 240 |
| eMMC Flash | 8GB |
| QSPI Flash | 1x 256Mbit |
| 1.8V High-Performance (HP) I/Os | 96 |
| 3.3V High-Density (HD) I/O | 84 |
Features
| QSPI FLASH | 1x 256Mbit, for user data storage |
| eMMC FLASH | 8GB, for system/boot storage |
| Board-to-Board connectors | 4x 120-pin Panasonic Industrial Grade Connectors (AXK5A2137YG), matching connector on the carrier board is AXK6A2337YG |
| Active Crystal Oscillator | 1x Single-ended 33.333MHz provide PS Clock 1x Differential 200MHz for the PL Logic and DDR Reference |
| LEDs | 2x, 1 Power (PWR), 1 DONE |
Power Supply
Voltage Input: +12V, via Board-to-Board connector J32
What's Included
| FPGA Board | 1 | DC Fan (optional) | 1x FAN8060 |
Dimensions
| Dimension | 80mm x 60mm |
| Connector Mated height | 3.0mm |
| PCB | 16 Layer, immersion gold (Au) PCB, Independent GND and Power Layers |
Documents & Quick Links
ACU2CG Recommended by xilinx.com
Full documentation including DXF files will be provided by CodeRobin IT.