Description
AXKU15 is a Top End High Performance PCIE3.0 x16 Card with XCKU15P FPGA, 2x QSFP28, 2x HPC FMC, 2x MIPI, enabling high signal processing bandwidth, rich expandability. Ideal for packet processing and DSP-intensive functions, wireless MIMO, PON, and Nx100G.
The SOM model used is ACKU15.
FPGA Specification
| FPGA | XCKU15P-2FFVE1517I |
| Speed Grade | -2 |
| Chip Level | Industrial Grade |
| Working Temperature | -40℃~85℃ |
| System Logic Cells (K) | 1,143 |
| CLB Flip-Flops (K) | 1,045 |
| CLB LUTs (K) | 523 |
| Max. Distributed RAM (Mb) | 9.8 |
| Total Block RAM (Mb) | 34.6 |
| UltraRAM (Mb) | 36.0 |
| Clock Mgmt Tiles (CMTs) | 11 |
| DSP Slices | 1,968 |
| PCIE4 (PCIe® Gen3 x16) | 5 |
| 150G Interlaken | 4 |
| 100G Ethernet w/ KR4 RS-FEC | 4 |
| GTH 16.3 Gb/s Transceivers | 32 |
| GTY 28.21 Gb/s Transceivers | 24 |
| HD I/O | 88 |
| HP I/O | 256 |
| LVDS Pairs | 128 |
Board Features
| DDR4 | 5 Pieces of 1GB DDR4, 5GB total, 80 bit bus width, max rate 2666Mbps |
| QSPI Flash | 2 Pieces of 64MB, for FPGA bin file and user data storage |
| Crystal Oscillator | 2x 200MHz Differential Crystal, Reference Clock for the FPGA and DDR4 |
| FMC | 2x HPC (*) |
| PCI Express 3.0 | x16 lane, up to 8G Baud each lane |
| MIPI | 2x MIPI x4 Lane, rate up to 2.5Gb/s |
| QSFP28 | 2x QSFP28, up to 60Gbit/s each channel. |
| USB UART | for Serial Communication with PC/Devices |
| Gigabit Ethernet | 1x 10/100/1000M Ethernet with RJ-45 |
| JTAG | 10-pin 2.54mm (0.1-inch) Standard JTAG port for Program Debug and Download |
| Temperature Sensor | LM75A, for onboard ambient temperature |
| EEPROM | 1x 24LC04 with IIC |
| SD Card Slot | 1 micro SD Card Slot, support SD Mode and SPI Mode |
| LED | SOM: 1 PWR, 1 DONE, 1 User; Carrier: 9 LEDs, 1 Power, 4 User, 2 UART (TX/RX), 2 User (on PCI Bracket) |
| Push-Buttons | 4x: 4 User |
Power Supply
Voltage Input: +12 V DC, Barrel plug 2.1 x 5.5mm
Current Input: Max. Current 3 A
What's Included
| FPGA Board | 1 | DC Fan (installed) | 1 |
| Mini USB Cable | 1 | Programming Cable | 1 set |
| 12V Power Adapter | 1 | PCI Bracket | 1 |
Dimensions
| Dimension | 226mm x 111mm (Carrier Board) 80mm x 80mm (SOM) |
| PCB | 14 Layer (Carrier Board) 17 Layer (SOM) Independent GND and Power Layers |
Resources & Downloads
Full documentation including Schematics, Demo projects (if applicable) will be provided by CodeRobin.