Description
AX7350 is a Mid Range Xilinx Zynq-7000 XC7Z035 PCI Express 2.0 ROOT Mode Development Card with 1x LPC FMC, 2x SFP+, 2x Gigabit Ethernet and PCIE x8 Slot (x4 Signal), enabling unique ability to act as PCIE ROOT to communicate with another PCIE device, which can be beneficial while designing a wide range of embedded applications including ADAS, Medical Endoscope, Small Cell Baseband, Machine Vision and Multi-function Printers.
AX7350 is a single board design with a PCIE slot. For a more streamlined SOM + Carrier form with XC7Z035, you can check our AX7Z035.
FPGA Specification
| FPGA | XC7Z035-2FFG676I |
| Processor Core | Dual-Core ARM Cortex-A9 MPCore Up to 800MHz |
| Speed Grade | -2 |
| Chip Level | Industrial Grade |
| Working Temperature | -40℃~85℃ |
| Logic Cells | 275K |
| Look-Up Tables (LUTs) | 171,900 |
| Flip-Flops | 343,800 |
| Total Block RAM | 17.6Mb |
| (# 36Kb Blocks) | (500) |
| DSP Slices | 900 |
| PCI Express® | Gen2 x8 |
| Analog Mixed Signal (AMS) / XADC | 2x 12 bit, MSPS ADCs with up to 17 Differential Inputs |
| GTX Transceivers | 8x 12.5Gb/s |
| PS MIO | 128 (FPGA pin) |
| HR IO | 100 (FPGA pin) |
| HP IO | 150 (FPGA pin) |
Board Features
| DDR3 | PS: 2 Pieces of 512MB DDR3, 1GB total, 32 bit bus width, max rate 1066Mbps; PL: 2 Pieces of 512MB DDR3, 1GB total, 32 bit bus width, max rate 1600Mbps. |
| QSPI Flash | 1 Piece of 256Mbit, for FPGA bin file and user data storage |
| eMMC | 8GB, for Large capacity storage in the ZYNQ system |
| FMC | 1x LPC FMC, includes 34 pairs of Differential IO, 1x GTX Transceivers. |
| PCI Express 2.0 | ROOT Mode, x8 slot, x4 lane, up to 5G Baud each lane. Supports NVMe SSD. |
| SFP+ | 2x SFP+, up to 10.3125Gb/s each channel. |
| Gigabit Ethernet | 2x 10/100/1000M Ethernet with RJ-45 |
| JTAG | 1x USB JTAG port for Program Debug and Download |
| HDMI | 1x Output, max 1080p@60Hz, supports 3D. |
| USB 2.0 | 4x USB 2.0, for USB peripherals |
| USB UART | for Serial Communication with PC/Devices |
| Crystal Oscillator | 33.333MHz Active to the PS, 50MHz Single-ended to the PL, 200MHz Differential to PL DDR, 156.25MHz Differential to the GTX Transceivers. |
| SD Card Slot | 1 micro SD Card Slot, support SD Mode and SPI Mode |
| LED | 1 PWR, 1 DONE, 4 PL User, 1 PS User, 2 Serial (TX/RX) |
| Push-Buttons | 1 Power, 1 Reset, 1 PS User, 4 PL User |
Power Supply
Voltage Input: +12 V DC, Barrel plug 2.1 x 5.5mm
Current Input: Max. Current 2 A
What's Included
| FPGA Board | 1 | DC Fan | 1 (installed) |
| Mini USB Cable | 2 | Acrylic Panel (Top) | 1 (installed) |
| 12V Power Adapter | 1 | ||
| SD Card | 1x 32GB | SD Card Reader | 1x |
Dimensions
| Dimension | 220mm x 125mm |
| PCB | 12 Layer Independent GND and Power Layers |
Quick Links
AX7350 Recommended by xilinx.com
Full documentation including DXF files will be provided by CodeRobin IT.