Description
AX7450 is a Top End Xilinx Zynq-7000 XC7Z100 PCI Express 2.0 x8 Development Card with 1x HPC FMC, 2x SMA, 3GB DDR3, 8GB eMMC, enabling highly differentiated designs for a wide range of embedded applications including ADAS, Medical Endoscope, Small Cell Baseband, Machine Vision and Multi-function Printers.
AX7450 is a single board design. For a SOM + Carrier board with XC7Z100 please check our AX7Z100.
FPGA Specification
| FPGA | XC7Z100-2FFG900I |
| Processor Core | Dual-Core ARM Cortex-A9 MPCore Up to 800MHz |
| Speed Grade | -2 |
| Chip Level | Industrial Grade |
| Working Temperature | -40℃~85℃ |
| Logic Cells | 444K |
| Look-Up Tables (LUTs) | 277,400 |
| Flip-Flops | 554,800 |
| Total Block RAM | 26.5Mb |
| (# 36Kb Blocks) | (755) |
| DSP Slices | 2,020 |
| PCI Express® | Gen2 x8 |
| Analog Mixed Signal (AMS) / XADC | 2x 12 bit, MSPS ADCs with up to 17 Differential Inputs |
| GTX Transceivers | 16x 12.5Gb/s |
| PS MIO | 128 (FPGA pin) |
| HR IO | 212 (FPGA pin) |
| HP IO | 150 (FPGA pin) |
Board Features
| DDR3 | PS: 2 Pieces of 512MB DDR3, 1GB total, 32 bit bus width, max rate 1066Mbps; PL: 4 Pieces of 512MB DDR3, 2GB total, 64 bit bus width, max rate 1066Mbps. |
| QSPI Flash | 2 Piece of 256Mbit, for FPGA bin file and user data storage |
| eMMC | 8GB, for Large capacity storage in the ZYNQ system |
| FMC | 1x HPC FMC, includes 84 pairs of Differential IO, 8x GTX Transceivers. |
| PCI Express 2.0 | x8 lane, up to 5G Baud each lane. |
| SMA | 2x SMA, connecting External Trigger Signal or Clock |
| Gigabit Ethernet | 1x 10/100/1000M Ethernet with RJ-45 |
| JTAG | 10-pin 2.54mm (0.1-inch) Standard JTAG port for Program Debug and Download |
| USB 2.0 | 1x USB 2.0, for USB peripherals |
| USB UART | for Serial Communication with PC/Devices |
| Crystal Oscillator | 33.333MHz Active to the PS, 50MHz Single-ended to the PL, 200MHz Differential to PL DDR, 156.25MHz Differential to the GTX Transceivers. |
| SD Card Slot | 1 micro SD Card Slot, support SD Mode and SPI Mode |
| LED | 1 PWR, 1 DONE, 4 PL User, 2 Serial (TX/RX), 2 User (PCI Bracket) |
| Push-Buttons | 1 Power, 1 Reset, 1 PL User |
Power Supply
Voltage Input: +12 V DC, Barrel plug 2.1 x 5.5mm
Current Input: Max. Current 2 A
What's Included
| FPGA Board | 1 | DC Fan | 1 (installed) |
| Mini USB Cable | 1 | Programming Cable | 1 set |
| 12V Power Adapter | 1 | PCI Bracket | 1 |
| SD Card | 1x 32GB | SD Card Reader | 1x |
Dimensions
| Dimension | 190.2mm x 106.6mm |
| PCB | 4 Layer Independent GND and Power Layers |
Quick Links
AX7450 Recommended by xilinx.com
Full documentation including DXF files will be provided by CodeRobin IT.