Description
Comparison
| FPGA Chip | XC7Z015-2CLG485I | ||
| Core Processor | Dual-Core ARM Cortex-A9 @ 767 MHz | RAM | DDR3, 1GB, 1066Mbps |
| Speed Grade | -2 | Chip Level | Industrial Grade |
| Working Temperature | -40℃~85℃ | Logic Cells | 74K |
| Look Up Tables (LUTs) | 46200 | Multiplier | 160 (18x25MACCs) |
| CLB Flip-Flops | 92400 | BLOCK RAM | 3.3Mb |
| EMMC FLASH | 8GB | QSPI FLASH | 256MBit |
| GTX Transceivers | PCIE Gen2 x4 | PS MIOs | 39 |
| PL IOs | 148 | Voltage Adjustable IO | 50 |
| LVDS | 24 |
Features
| DDR3 | Two 512MB DDR3, 32bit Bus, Data Rate 1066Mbps |
| QSPI FLASH | 256Mbit, for User Data storage |
| EMMC FLASH | 8GB, for Large capacity storage in the ZYNQ system |
| GTX Transceivers | 4 GTP, each up to 6.25 Gb/s, for SFP and PCIE data communication |
| SFP Interface | 2-way High Speed SFP Interface, receiving and transmitting speed of each channel is up to 6.125Gb/s |
| PCIE 2.0 | provides a standard PCIE 2.0 x2 High speed data transmission interface, single channel rate up to 5G baud |
| Ethernet | 2x 10/100/1000M with RJ-45 for data exchange |
| JTAG | 10-pin 0.1-inch (2.54 mm) pitch standard JTAG for Debug and Download |
| HDMI input/output | HDMI Video Input and Output, up to 1080p@60Hz, support 3D Output and data input in different formats |
| USB 2.0 | 4x USB 2.0, for USB Peripherals |
| USB UART | 2x USB UART, for serial communication with PC or devices |
| Crystal Oscillator | 33.333MHz stable clock source for the PS system, 125MHz Active Crystal Oscillator |
| SD Card Slot | 1 micro-SD Card Slot, support SD mode and SPI mode |
| LED | 5x LED, 1 for PS, 4 for PL |
| KEYs | 3x, 1 Reset, 1 PS, 1 PL |
| 40-pin Expansion Ports | 1x 40-pin Expansion Ports (0.1 inch/2.54 mm Pitch), connect with various ALINX Modules |
Power Supply
Voltage Input: +12 V DC, Max Current 2A
What's Included
| FPGA Board | 1 | USB Downloader Cable | 1 Set |
| Mini-USB Cable | 1 | Acrylic Panel (Top) | 1 |
| 12V Power Adapter | 1 | Card Reader | 1 |
| 8GB TF Card | 1 |