PUZHI PZ-K7410T-FH: Xilinx Kintex-7 XC7K410T FPGA Development Board
PUZHI PZ-K7410T-FH: Xilinx Kintex-7 XC7K410T FPGA Development Board
PUZHI PZ-K7410T-FH: Xilinx Kintex-7 XC7K410T FPGA Development Board
PUZHI PZ-K7410T-FH: Xilinx Kintex-7 XC7K410T FPGA Development Board
  • Load image into Gallery viewer, PUZHI PZ-K7410T-FH: Xilinx Kintex-7 XC7K410T FPGA Development Board
  • Load image into Gallery viewer, PUZHI PZ-K7410T-FH: Xilinx Kintex-7 XC7K410T FPGA Development Board
  • Load image into Gallery viewer, PUZHI PZ-K7410T-FH: Xilinx Kintex-7 XC7K410T FPGA Development Board
  • Load image into Gallery viewer, PUZHI PZ-K7410T-FH: Xilinx Kintex-7 XC7K410T FPGA Development Board

PUZHI PZ-K7410T-FH: Xilinx Kintex-7 XC7K410T FPGA Development Board

Regular price
£887.99
Sale price
£887.99
Regular price
Sold out
Unit price
per 

Lead time: 2 Weeks

Tax included only for the UK. Shipping calculated at checkout.

Description

PZ-K7410T-FH is an Xilinx Kintex-7 XC7K410T Mid-range FPGA Development Board. Equipped with 2GB DDR3 memory, QSPI Flash, Clock sources on the PZ-K7410T SOM; 2x HDMI (4K), 2x SFP+, and 1x HPC FMC on the PCIE form Carrier board, gives you a versatile cost-effective kit for fast developing your mission critical applications.

Design Highlights:

  • Fully connected HPC FMC (DP, HA, HB, LA)
  • SFP+, PCIE 2.0, HDMI(4K)
  • IO Voltage 1.8/2.5/3.3 Adjustable
  • 5x User LED, 5x User Push button

The SOM used on this development board is PZ-K7410T.

FPGA Specification
FPGA XC7K410T-2FFG900I
Slices 63,550
Logic Cells 406,720
CLB Flip-Flops 508,400
Maximum Distributed RAM (Kb) 5,663
Block RAM/FIFO w/ ECC (36 Kb each) 795
Total Block RAM (Kb) 28,620
CMTs (1 MMCM + 1 PLL) 10
Maximum Single-Ended I/O 500
Maximum Differential I/O Pairs 240
DSP48 Slices 1,540
PCIe® Gen2 1
Analog Mixed Signal (AMS) / XADC 1
GTX Transceivers (12.5 Gb/s Max Rate) 16
Chip Level Industrial Grade
Speed Grade -2
Working Temperature -40℃ ~ +85℃

Board Features

RAM DDR3, 2GB, 4x 512MB, 64bit Bus
QSPI FLASH 32MB, for user data storage
EEPROM 1x AT24C64D-SSHM-T
Boot Mode JTAG/QSPI
HDMI Input TI TMDS181RGZR
HDMI Output TI SN75DP159RGZ
SFP+ 2x SFP+ Interfaces, speed of each channel up to 10Gb/s
Gigabit Ethernet 1x RJ45
JTAG 1x built-in, via USB
UART 1x, for serial communication with PC or devices
40-pin Expansion Port 1x, 2.54mm-pitch, 32 Single-Ended or 16 Pairs Differential IO
Active Crystal Oscillator (SOM) 1x Differential 125MHz for the GTX
1x Differential 200MHz for the FPGA Logic
SD Card Slot 1x micro-SD Card Slot, support SD mode and SPI mode
LEDs SOM: 1x DONE, 5x USER
Carrier: 1x POWER, 5x USER
Push Buttons 1x RESET, 5x USER
PCIe 2.0 x4 wide, x2 Lane, up to 5.0 GT/s per Lane
FMC 1x HPC (DP, HA, HB, LA)
Board-to-Board connectors 4x 120-pin 0.6 mm Pitch Hirose Industrial Grade Connectors (FX8-120S-SV), matching connector on the SOM board is FX8-120P-SV
Power Supply

Voltage Input: +12V, via DC or PCIE

Max 3A

What's Included
FPGA Board 1 Heat Sink & DC Fan (installed) 1x
12V DC Power Adaptor 1x Micro-USB Cable 2x
SD Card 1x 8GB SD Card Reader 1x USB
Dimensions
Dimension 165.00mm x 108.00mm
Connector Mated height 3.0mm
PCB Immersion gold (Au) PCB, Independent GND and Power Layers

Coming soon

Full documentation including DXF files will be provided by CodeRobin IT.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)