Description
Comparison
| Core Board | AC7Z010 | AC7Z020 |
| FPGA Chip | XC7Z010-1CLG400I | XA7Z020-1CLG400I / XC7Z020-2CLG400I |
| Processor | ARM Cortex-A9 x2, 666MHz | ARM Cortex-A9 x2, 767MHz |
| RAM | DDR3, 512MB, Data Rate 1066Mbps | DDR3, 1GB, Data Rate 1066Mbps |
| Logic Cells | 28K | 85K |
| Look Up Tables (LUTs) | 17600 | 53200 |
| CLB Flip-Flops | 35200 | 106,400 |
| DSP Slices | 80 | 220 |
| Block RAM | 2.1Mb | 4.9Mb |
| PS MIO | 48 | 48 |
| PL IO | 96 | 120 |
Features
| JTAG | 10-pin 0.1-inch (2.54mm) Standard JTAG port for Programs Debug and Download |
| Ethernet Interface | 10/100/1000M Ethernet with RJ45 for data exchange |
| HDMI Output | support 1080p@60Hz Output |
| USB2.0 | x1, for external USB Peripherals |
| USB UART | for serial communication with PC or devices |
| CAN Bus | 2x |
| RS485 | 2x |
| AD Interface | 2x SMA interfaces, for Analog Signal Input and Voltage Conversion |
| Real Time Clock | RTC backed by battery, model is CR1220 |
| QSPI FLASH | 256Mbit, for user data storage |
| LEDs | 7x, 2 Power Indicator, 1 DONE, 4 PL |
| KEYs | 1 Power Switch, 1 Reset, 4 PL User |
| Crystal Oscillator | 33.333MHz for the PS, 50MHz for the PL Logic |
| SD Card Slot | 1x micro-SD Card Slot, support SD mode and SPI mode |
| MIPI Interface | Used for connect with MIPI Camera Module (only on AX7Z020) |
| 40-pin Expansion Port | 2x 40-pin Expansion Port (0.1 inch / 2.54mm pitch), fit with ALINX Binocular Camera Module, TFT LCD Screen, Camera, AD/DA, etc. |
| EEPROM | EEPROM 24LC04 with IIC |
| Temperature Sensor | LM75, for onboard ambient temperature |
Power Supply
Voltage Input: +5 V DC, Max Current 2A
What's Included
| FPGA Board | 1 | 32G SD Card | 1 |
| Mini-USB Cable | 1 | SD Card Reader | 1 |
| 5V Power Adapter | 1 | Programming Cable | 1 Set |