Description
Zynq® UltraScale+™ MPSoC devices provide 64-bit processor scalability while combining real-time control with soft and hard engines for graphics, video, waveform, and packet processing.
Zynq UltraScale+ EGSource: https://www.xilinx.com/products/silicon-devices/soc/zynq-ultrascale-mpsoc.html
Broad Device Range for Next-Generation Applications:
- Quad Arm Cortex-A53
- Dual Arm Cortex-R5F
- 16nm FinFET+ Programmable Logic
- Arm Mali™-400MP2
ACU15EG is our High End Xilinx Zynq UltraScale+ MPSoC SOM, equipped with 6GB DDR4 memory, 512Mbit QSPI and 8GB eMMC Flash, 3x oscillators, and Power supply. Through four 120-pin I/O connectors on the backside, PS side PCIe, USB, SATA, DisplayPort, and Ethernet, PL side GTH Transceivers and IOs are exposed for your application specific carrier board.
Ideal for:
- 5G Wireless
- Next-generation ADAS
- Industrial Internet-of-Things
- AI
For an ALINX designed carrier board with this SOM, please check out our AXU15EG.
Model Matrix
| Model | ACU9EG | ACU15EG |
| FPGA | XCZU9EG-2FFVB1156I | XCZU15EG-2FFVB1156I |
| Processors | 4x ARM Cortex-A53, 1.333GHz 2x ARM Cortex-R5, 533MHz |
|
| GPU | ARM Mali-400 MP2 | |
| RAM | PS: DDR4, 4GB, 64bit Bus, 2400Mbps PL: DDR4, 2GB, 32bit Bus, 2400Mbps |
|
| High-Speed Connectivity | PCIe® Gen2 x4, 2x USB3.0, SATA 3.1, DisplayPort, 4x Tri-mode Gigabit Ethernet | |
| General Connectivity | 2xUSB 2.0, 2x SD/SDIO, 2x UART, 2x CAN 2.0B, 2x I2C, 2x SPI, 4x 32b GPIO | |
| Transceivers | GTH 16.3Gb/s Transceivers: 24x | |
| Chip Level | Industrial Grade | |
| Speed Grade | -2 | |
| Working Temperature | -40℃~85℃ | |
| Logic Cells (K) | 600 | 747 |
| CLB Flip-Flops(K) | 548 | 682 |
| CLB Look Up Tables (LUTs) (K) | 274 | 341 |
| Max. Distributed RAM (Mb) | 8.8 | 11.3 |
| Total Block RAM (Mb) | 32.1 | 26.2 |
| UltraRAM (Mb) | - | 31.5 |
| Clock Management Tiles (CMTs) | 4 | |
| DSP Slices | 2,520 | 3,528 |
| eMMC Flash | 8GB | |
| QSPI Flash | 2x 256Mbit | |
| 1.8V High-Performance (HP) I/Os | 96 | |
| 3.3V High-Density (HD) I/O | 66 | |
Features
| QSPI FLASH | 2x 256Mbit, for user data storage |
| eMMC FLASH | 8GB, for system/boot storage |
| Board-to-Board connectors | 4x 120-pin Panasonic Industrial Grade Connectors (AXK5A2137YG), matching connector on the carrier board is AXK6A2337YG |
| Active Crystal Oscillator | 1x Single-ended 33.333MHz provide PS Clock 1x Differential 200MHz for the PL Logic and DDR Reference |
Power Supply
Voltage Input: +12V, via Board-to-Board connector J30
What's Included
| FPGA Board | 1 | DC Fan (optional) | 1x FAN8060 |
Dimensions
| Dimension | 80mm x 60mm |
| Connector Mated height | 3.0mm |
| PCB | 16 Layer, immersion gold (Au) PCB, Independent GND and Power Layers |
Documents & Quick Links
ACU15EG Recommended by xilinx.com
Full documentation including DXF files will be provided by CodeRobin IT.