Description
Zynq® UltraScale+™ MPSoC devices provide 64-bit processor scalability while combining real-time control with soft and hard engines for graphics, video, waveform, and packet processing.
Zynq UltraScale+ EGSource: https://www.xilinx.com/products/silicon-devices/soc/zynq-ultrascale-mpsoc.html
Broad Device Range for Next-Generation Applications:
- Quad Arm Cortex-A53
- Dual Arm Cortex-R5F
- 16nm FinFET+ Programmable Logic
- Arm Mali™-400MP2
ACU11EG is our Upper End Xilinx Zynq UltraScale+ MPSoC SOM, equipped with 8GB DDR4 memory, QSPI and eMMC Flash, Clock sources, and Power. Through four 120-pin I/O connectors on the backside, PS side PCIe, USB, SATA, DisplayPort, and Ethernet, PL side GTH Transceivers and IOs are exposed, great for your Industrial applications.
Ideal for:
- 5G Wireless
- Next-generation ADAS
- Industrial Internet-of-Things
- AI
For an ALINX designed PCIE carrier board with this SOM, please check out our Z11-P.
FPGA Specification
| FPGA | XCZU11EG-2FFVC1156I |
| Processors | 4x ARM Cortex-A53, 1.333GHz 2x ARM Cortex-R5, 533MHz |
| GPU | ARM Mali-400 MP2 |
| RAM | PS: DDR4, 4GB, 64bit Bus, 2400Mbps PL: DDR4, 4GB, 64bit Bus, 2400Mbps |
| High-Speed Connectivity | PCIe® Gen2 x4, 2x USB3.0, SATA 3.1, DisplayPort, 4x Tri-mode Gigabit Ethernet |
| General Connectivity | 2xUSB 2.0, 2x SD/SDIO, 2x UART, 2x CAN 2.0B, 2x I2C, 2x SPI, 4x 32b GPIO |
| Transceivers | GTH 16.3Gb/s Transceivers: 20x |
| Chip Level | Industrial Grade |
| Speed Grade | -2 |
| Working Temperature | -40℃~85℃ |
| System Logic Cells (K) | 653 |
| CLB Flip-Flops (K) | 597 |
| CLB LUTs (K) | 299 |
| Max. Distributed RAM (Mb) | 9.1 |
| Total Block RAM (Mb) | 21.1 |
| UltraRAM (Mb) | 22.5 |
| Clock Management Tiles (CMTs) | 8 |
| DSP Slices | 2,928 |
| 1.8V High-Performance (HP) I/Os | 134 |
| 3.3V High-Density (HD) I/O | 46 |
SOM Features
| QSPI FLASH | 2x 256Mbit, for user data storage |
| eMMC FLASH | 32GB, for system/boot storage |
| Board-to-Board connectors | 4x 120-pin Panasonic Industrial Grade Connectors (AXK5A2137YG), matching connector on the carrier board is AXK6A2337YG |
| Active Crystal Oscillator | 1x Single-ended 33.333MHz provide PS Clock 1x Differential 200MHz for the PL Logic and DDR Reference |
| LEDs | 1x Power Indicator (PWR) |
Power Supply
Voltage Input: +12V, via Board-to-Board connector J29
What's Included
| FPGA Board | 1 | DC Fan (optional) | 1x FAN8060 |
Dimensions
| Dimension | 80mm x 60mm x 7.1mm |
| Connector Mated height | 9.1mm |
| PCB | 16 Layer, immersion gold (Au) PCB, Independent GND and Power Layers |
Documents & Quick Links
Full documentation including Schematics, DXF files, Tutorials and more will be provided by CodeRobin IT.