Description
PZ-ZU7EV-SOM is a Top EV Xilinx Zynq UltraScale+ MPSoC SOM, equipped with 8GB DDR4 memory, QSPI and eMMC Flash, Clock sources, and Power. Through 3x 168-pin I/O connectors on the backside, PS side PCIe, USB, SATA, DisplayPort, and Ethernet, PL side GTH Transceivers and IOs are exposed, great for your Industrial applications.
Design Highlights:
- IO Voltage 1.8/2.5/3.3 Adjustable
- Tons of IOs, GT Transceivers
- Dual QSPI Flash for faster booting
- GPHY Ready
For a PUZHI designed carrier board with this SOM, please check out our PZ-ZU7EV-KFB.
FPGA Specification
| FPGA | XCZU7EV-2FFVC1156I |
| Processors | 4x ARM Cortex-A53, up to 1.5GHz 2x ARM Cortex-R5, up to 600MHz |
| GPU | ARM Mali-400 MP2, up to 667MHz |
| System Logic Cells (K) | 504 |
| CLB Flip-Flops (K) | 461 |
| CLB LUTs (K) | 230 |
| Max. Distributed RAM (Mb) | 6.2 |
| Total Block RAM (Mb) | 11.0 |
| UltraRAM (Mb) | 27.0 |
| Clock Management Tiles (CMTs) | 8 |
| DSP Slices | 1,728 |
| Video Codec Unit (VCU) | 1, H.264/H.265 |
| AMS - System Monitor | 1 |
| GTH 16.3Gb/s Transceivers | 24 |
| PS to PL Interface | 12 x 32/64/128b AXI Ports |
| (PS) High-Speed Connectivity | PCIe® Gen2 x4, 2x USB3.0, SATA 3.1, DisplayPort, 4x Tri-mode Gigabit Ethernet |
| (PS) General Connectivity | 2xUSB 2.0, 2x SD/SDIO, 2x UART, 2x CAN 2.0B, 2x I2C, 2x SPI, 4x 32b GPIO |
| Chip Level | Industrial Grade |
| Speed Grade | -2 |
| Working Temperature | -40℃ ~ +85℃ |
SOM Features
| DDR4 | PS: 4x 1GB DDR4, total 4GB, 64bit Bus, Data Rate 2400Mbps PL: 4x 1GB DDR4, total 4GB, 64bit Bus, Data Rate 2400Mbps |
| eMMC FLASH | 8GB, for system/boot storage |
| QSPI FLASH | 2x 32MB, for user data storage |
| EEPROM | 64Kb |
| Boot Mode | JTAG/SD/QSPI/EMMC |
| Gigabit Ethernet | 1x RTL8211 GPHY, to PS |
| PS MIO | 38x, 1.8V |
| PS GTR | 4 Pairs (TX/RX) |
| PL GTH | 20 Pairs (TX/RX) |
| PL IO | 192x Single-ended: 48x HD 1.8/2.5/3.3V Adjustable (Defaults 3.3V) 144x HP 1.2/1.8V Adjustable (Defaults 1.8V) |
| Active Crystal Oscillator |
1x Single-ended 33.333MHz provide PS Clock 1x Differential 125MHz for the GTH 1x Differential 200MHz for the FPGA Logic |
| LEDs | 1x DONE, 3x User |
| Push Buttons | 1x RESET |
| Board-to-Board connectors | 3x 168-pin 0.5 mm Pitch Hirose Industrial Grade Connectors (FX10A-168P-SV), matching connector on the Carrier board is FX10A-168S-SV |
Power Supply
Voltage Input: +8 ~ +12 V DC, via Board-to-Board connector
Current Input: Max. Current 5 A
What's Included
| FPGA SOM | 1 | Heat Sink & DC Fan (PZ-H857410, Optional) | 1x |
Dimensions
| Dimension | 85.00mm x 75.00mm |
| PCB | Immersion gold (Au) PCB, Independent GND and Power Layers |
Resources & Downloads
PZ-ZU7EV-SOM User Manual (PDF)
Full documentation including: Tutorial with source code; Reference Design, CAD/DXF, Schematic PDF; and much more, will be provided by CodeRobin.