Description
PZ7100-SOM is an Xilinx Zynq-7000 XC7Z100 Industry Grade SOM. Equipped with 2GB (1GB PS + 1GB PL) DDR3 memory, 32MB QSPI and 8GB eMMC FLASH, Clock Sources, Power, and Gigabit Ethernet PHY. By 4x 120-pin connectors on the backside, PS MIO, USB, SATA, HDMI and Gigabit Ethernet, PL side PCIe, GTX Transceivers are exposed, great for your Industrial applications.
Design Highlights:
- Onboard Gigabit PHY
- eMMC/NAND options
- IO Voltage 1.8/2.5/3.3 Adjustable
- 5x User LED
For an PUZHI designed carrier board with this SOM, please check out our PZ7100.
FPGA Specification
| FPGA | XC7Z100-2FFG900I |
| 7 Series PL Equivalent | Kintex-7 |
| Processors | Dual-Core ARM Cortex-A9 MPCore, Up to 800MHz |
| Logic Cells | 444K |
| Look-Up Tables (LUTs) | 277,400 |
| Flip-Flops | 554,800 |
| Total Block RAM (# 36Kb Blocks) | 26.5Mb (755) |
| DSP Slices | 2,020 |
| PCI Express | Gen2 x8 |
| Transceivers | GTX 12.5Gb/s x16 |
| HR (high-range) I/O | 212 |
| HP (high-performance) I/O | 150 |
| PS I/O | 128 |
| Chip Level | Industrial Grade |
| Speed Grade | -2 |
| Working Temperature | -40℃~85℃ |
SOM Features
| RAM | PS: DDR3, 1GB, 32bit Bus, 1866MT/s PL: DDR3, 1GB, 32bit Bus, 1866MT/s |
| QSPI FLASH | 32MB, for user data storage |
| eMMC FLASH | 8GB, for system/boot storage |
| Boot Mode | JTAG/QSPI/NAND/SD, DIP Switch |
| Gigabit Ethernet PHY | KSZ9031 |
| IO | 24x PS MIO, 240x PL (48x Fixed 1.8V; 192x Voltage Adjustable 1.8/2.5/3.3) |
| Active Crystal Oscillator | 1x Single-ended 33.333MHz provide PS Clock 1x Differential 125MHz for the GTX 1x Differential 200MHz for the PL Logic |
| LEDs | 1x DONE, 5x USER |
| Push Buttons | 1x RESET |
| Board-to-Board connectors | 4x 120-pin 0.6 mm Pitch Hirose Industrial Grade Connectors (FX8-120P-SV), matching connector on the carrier board is FX8-120S-SV |
Power Supply
Voltage Input: +7 ~ +12V, via Board-to-Board connectors
Max 2A
What's Included
| FPGA Board | 1 | Heat Sink & DC Fan (optional) | 1x |
Dimensions
| Dimension | 83.8mm x 64.8mm |
| Connector Mated height | 3.0mm |
| PCB | 12 Layer, immersion gold (Au) PCB, Independent GND and Power Layers |
Documents & Quick Links
Coming soon
Full documentation including DXF files will be provided by CodeRobin IT.