Kintex®-7 FPGAs provide your designs with exceptional price/performance/watt at 28nm while giving you high DSP ratios, cost-effective packaging, and support for mainstream standards like PCIe® Gen3 and 10 Gigabit Ethernet. The Kintex-7 family is ideal for applications including 3G and 4G wireless, flat panel displays, and video over IP solutions.Source: https://www.xilinx.com/products/silicon-devices/fpga/kintex-7.html
AX7325 / AX7325B is our High Performance Optical Communication Oriented Development Board with Xilinx XC7K325 FPGA, 1x QSFP+, 4x SFP+, 1x FMC and PCIe Gen2 x8. Designed for Fibre-optic communication, Data-centre Acceleration, Packet Switching/Storage and Wireless research/Industrial applications.
For a SOM + Carrier PCIe board with 4x 3G-SDI interfaces, please check our AV7K300.
For a SOM + Carrier PCIe board with 4x 4K@30Hz HDMI, please look at our AV7K325.
|RAM||2GB DDR3, 64bit|
|Chip Level||Industrial Grade|
|Look Up Tables (LUTs)||50,950|
|Block RAM/FIFO w/ ECC (36Kb each)||445|
|Total Block RAM (Kb)||16,020|
|Max. Distributed RAM (Kb)||4,000|
|QSPI Flash||128 Mbit|
|GTX Transceiver||12.5Gb/s x16|
|DDR3||4x 512MB DDR3, total 2GB, 64bit Bus, Data Rate 1600Mbps|
|QSPI FLASH||128Mbit, for user data storage|
|QSFP+||1x QSFP+ Interface, up to 40Gb/s|
|SFP+||4x SFP+ Interfaces, speed of each channel up to 10Gb/s|
|SODIMM||1x 204-pin DDR3 SDRAM SODIMM socket, supports up to 8GB Micron SODIMM, 64 bit bus, 400MHz/800Mbps.|
|PCIe 2.0||x8, High-Speed Data Transmission Interface, single channel rate up to 5G baud|
|FMC||1x FMC LPC, for Xilinx/ALINX FMC|
|Analog Mixed Signal (AMS) / XADC||1x 12bit 1Mbps AD|
|JTAG||10-pin 2.54mm (0.1-inch) Standard JTAG port for Programs Debug and Download|
|USB UART||for serial communication with PC or devices|
|Temperature Sensor||1x LM75, for ambient temperature measurement|
|Crystal Oscillator||4x Active Differential Oscillator, 1x 200MHz for the FPGA; 1x 200MHz for DDR; 1x 125MHz Clock Source for the QSFP+; 1x 156.25MHz for the SFP+.|
|LEDs||6x, POWER, DONE, 4x User|
|40-pin Expansion Port||1x 40-pin Expansion Port (2.54mm / 0.1 inch pitch), fit with ALINX Binocular Camera Module, TFT LCD Screen, Camera, AD/DA, etc.
Includes: 1x 5V, 2x 3.3V, 3x GND, 34x I/O.
|SD Card Slot||1x micro-SD Card Slot, support SD mode and SPI mode|
Voltage Input: +12 V DC, 2.1mm x 5.5mm
Current Input: Max. Current 3A
|FPGA Board||1||DC Fan (installed)||1|
|Mini-USB Cable||1||Programming Cable||1 Set|
|12V Power Adapter||1||PCIe Fence||1|
|Dimension||221mm x 120mm|
|PCB||12 Layer, Independent GND and Power Layers|